Introdução

This guide will assist you in removing the vibration motor from your Sony Ericsson T68i.

Peças

Não são necessárias peças.

Remove the battery from the back. Remove the battery from the back.
  • Remove the battery from the back.

Adicionar comentário

Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips. Do not bend it too far down, or else you risk breaking the two bottom clips. Do not bend it too far down, or else you risk breaking the two bottom clips.
  • Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.

  • Do not bend it too far down, or else you risk breaking the two bottom clips.

Adicionar comentário

Unscrew all four Torx T6 screws. Keep in a safe place. Keep in a safe place.
  • Unscrew all four Torx T6 screws.

  • Keep in a safe place.

Adicionar comentário

After removing the screws, the two halves will separate. If not, then pry them gently apart. After removing the screws, the two halves will separate. If not, then pry them gently apart. After removing the screws, the two halves will separate. If not, then pry them gently apart.
  • After removing the screws, the two halves will separate. If not, then pry them gently apart.

Adicionar comentário

Remove the vibration motor visible in the front housing. Remove the vibration motor visible in the front housing.
  • Remove the vibration motor visible in the front housing.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Tim Dascomb

Member since: 13-04-2010

123 reputação

13 Guides authored

Equipe

Cal Poly, Team 26-34, Regan Spring 2010 Membro de Cal Poly, Team 26-34, Regan Spring 2010

CPSU-REGAN-S10S26G34

4 Membros

13 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 5

Todo: 2,357