Introdução
Screens for cellular devices are prone to cracking or shattering. There are several prerequisite steps required to access and remove the screen in place in your device. This guide will show you how to access the screen in order to replace in.
O que você precisa
-
-
Begin the disassembly by placing your Sony Ericsson QuickShare T630 on a flat surface.
-
-
-
-
To place a new screen, slide the green ribbon connector into the ribbon clamp that the defective screen was pulled from.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.
Equipe
University of Maine, Team 1-1, Diaz Fall 2013 Membro de University of Maine, Team 1-1, Diaz Fall 2013
UMAINE-DIAZ-F13S1G1
Membros da 4
Autoria de 6 guias
Um comentário
Worked well until the screen replacemet - ribbon cable would not go into clamp - phone plus new screen straight in the bin - a little gutted - but hey it was an old but loved phone.
