Introdução

Disassembling the back cover of the camera so that we can repair components from the inside.

Peças

Não são necessárias peças.

Slide the battery cover in the direction the arrow points.
  • Slide the battery cover in the direction the arrow points.

  • Pull the battery cover towards you.

Adicionar comentário

Flick the blue switch for the battery to pop out.
  • Flick the blue switch for the battery to pop out.

  • Remove the battery from the camera.

Adicionar comentário

  • Using the Phillips #00 Screwdriver, remove the two screws from the caution panel.

  • Remove that panel.

  • Careful for falling pieces.

Adicionar comentário

  • Remove the screw with a Phillips #00 Screwdriver from the right side of the camera (with '3x optical zoom' engraved on the side panel).

  • Remove that panel.

Adicionar comentário

  • Remove the screw using the Phillips #00 Screwdriver from the bottom the camera, closest to the back cover.

Adicionar comentário

  • Gently remove the back cover.

  • It may be a bit stiff, so use some force to remove it. Proceed with caution.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

kkfong91

Member since: 11-10-2010

293 reputação

2 Guides authored

Equipe

Cal Poly, Team 9-20, Regan Fall 2010 Membro de Cal Poly, Team 9-20, Regan Fall 2010

CPSU-REGAN-F10S9G20

5 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 7

Todo: 3,248