Introdução

This page will guide you through the removal of the front casing on the Sony Cyber-shot DSC W150.

Peças

Não são necessárias peças.

  1. The screws from the camera are extremely small so it is a good idea to have a small container to hold all the screws as you remove them.
    • The screws from the camera are extremely small so it is a good idea to have a small container to hold all the screws as you remove them.

    Adicionar comentário

  2. Take your screwdriver and remove the bottom screws of the camera. (The picture shows the lens facing away from you and the LCD facing you.) There should be four silver screws.
    • Take your screwdriver and remove the bottom screws of the camera. (The picture shows the lens facing away from you and the LCD facing you.) There should be four silver screws.

    Adicionar comentário

    • On the right side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and LCD screen facing you.)

    Adicionar comentário

    • On the left side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and the LCD screen facing you.)

    Adicionar comentário

    • Gently remove the back casing by holding onto both sides of the camera and pulling them apart.

    Adicionar comentário

    • Now, carefully pull off the back cover.

    Adicionar comentário

    • The two halves of the camera casing should now be separate.

    Adicionar comentário

    • Keep track of the small screws that you remove.

    • Opening, removing and/or replacing the front casing may void your manufacturers warranty

    Adicionar comentário

    • Remove the two screws at the top of the camera casing.

    There was no screw in the left hand location shown, when disassembling my camera for the first time.

    Chas - Responder

    • Gently pop open the plastic piece as shown.

    Adicionar comentário

    • Remove the screw connecting the front casing to the electrical components as shown.

    Adicionar comentário

    • Gently loosen and remove the side casing by firmly pulling with your fingers.

    • Take care not to break the fragile part or to scratch the LCD screen.

    Adicionar comentário

    • Remove the two screws connecting the front casing to the electrical components.

    Adicionar comentário

    • Gently loosen the front casing.

    • Be careful not to scratch any of the exposed electrical components.

    Adicionar comentário

    • Fully remove the front casing from the camera.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas concluíram este guia.

Julio Maravilla

Member since: 15-04-2010

191 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 33-73, Johann Spring 2010 Membro de Cal Poly, Team 33-73, Johann Spring 2010

CPSU-JOHANN-S10S33G73

3 Membros

2 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 1

Todo: 5,717