Introdução
The Button Board is a pivotal and integral part of the device. Any improper handling can cause issues in other parts of the camera.Be sure to keep track of all pieces that are taken apart.
O que você precisa
-
-
Remove the marked screw with a Phillips #000 screwdriver.
-
Remove the marked black M1.4 X 3.5 Phillips head screws
-
Use the spudger to gently remove the lower panel.
-
-
-
-
After removing the marked black M1.4 X 3.5 Phillips head screws with the Phillips #000 screwdriver on the side panel, using the spudger where the red arrow marks, insert and gently remove the side panel from the device.
-
From either corner of the button board gently use hands to remove the button board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.