Introdução

This guide shows a step by step process on how to replace the rear case of the camera. You must be careful during this guide due to certain parts being very vulnerable to breaking. If the case isn't staying in position or the buttons are unresponsive take a look at our troubleshooting guide for more help.

Peças

Não são necessárias peças.

Remove the 6mm Phillips #000 screws.
  • Remove the 6mm Phillips #000 screws.

Adicionar comentário

Remove the five 6mm Phillips #000 screws.
  • Remove the five 6mm Phillips #000 screws.

  • Remove the four 3mm Phillips #000 screws.

Adicionar comentário

  • Use the flat end of a plastic spudger to pry apart the rear cover from the body of the camera.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Christian Morales

Member since: 14-02-2018

115 reputação

Autoria de 1 guia

Equipe

USF Tampa, Team S1-G6, Nance Spring 2018 Membro de USF Tampa, Team S1-G6, Nance Spring 2018

USFT-NANCE-S18S1G6

3 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 27

Todo: 128