Conserte seus objetos Comunidade Loja

Sony Cyber-Shot DSC-TX9 LED Screen Replacement

Guia arquivado
Este guia é mantido exclusivamente para fins históricos. Use a versão atualizada do guia para executar o reparo.

Introdução

You will need a 001 screw driver and a pry stick for this repair.

O que você precisa

  1. Sony Cyber-Shot DSC-TX9 LED Screen Replacement, LED Screen: passo 1, imagem 1 %32 Sony Cyber-Shot DSC-TX9 LED Screen Replacement, LED Screen: passo 1, imagem 2 %32 Sony Cyber-Shot DSC-TX9 LED Screen Replacement, LED Screen: passo 1, imagem 3 %32

    • Remove all screws on the outside of the camera. A total of 6 screws will be removed.

    • Use a 0001 screw. Note: That the first two screws are in the first circle.

    Editar

  2. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: passo 2, imagem 1 %32 Sony Cyber-Shot DSC-TX9 LED Screen Replacement: passo 2, imagem 2 %32 Sony Cyber-Shot DSC-TX9 LED Screen Replacement: passo 2, imagem 3 %32

    • Once all screws are removed slide open the battery cover.

    • Pop off the front plate of the camera by moving the two pieces away from each other.

    • The front plate will partially be attached to the body of the camera by a ribbon. Detach with caution.

    • Next, remove the two silver screws on the inside of the camera.

    Editar

  4. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: passo 3, imagem 1 %32 Sony Cyber-Shot DSC-TX9 LED Screen Replacement: passo 3, imagem 2 %32

    • Pop off the back plate of the camera by gently pulling the inner plate out.

    • After the back plate is removed, the camera should appear like the second picture. The LED screen should be free and accessible to replace.

    Editar

  5. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: passo 4, imagem 1 %32

    • Use a pry stick to pop out the connector ribbon attached to the LCD screen.

    • A pair of tweezers may be needed to pull back a black slit to access the ribbon connector.

    Editar

  6. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: passo 5, imagem 1 %32

    • Attach the new LCD screen.

    • Follow the previous steps in reverse to put the camera back together.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 4 outros contribuidores

Melissa Pavelka

Membro desde: 09/24/15

131 Reputação

Autoria de 1 guia

Emblemas: 5

+2 outros emblemas

Equipe

Texas Tech, Team 19-1, Rauch Fall 2015 Membro de Texas Tech, Team 19-1, Rauch Fall 2015

TTU-RAUCH-F15S19G1

Membros da 4

1 Guia de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 379