Introdução

Keeping the back panel in good condition is key to extending the lifetime of the camera.

Peças

Não são necessárias peças.

  1. Power down the camera and remove the batteries.
    • Power down the camera and remove the batteries.

  2. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  3. Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing. There are six 5.22mm long, 3.00mm head diameter screws total. The left side is not shown but there should be 1 screw on that side.
    • Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing.

    • There are six 5.22mm long, 3.00mm head diameter screws total.

    • The left side is not shown but there should be 1 screw on that side.

  4. Remove the back casing. The casing itself is sturdy so don't be afraid to remove it forcefully.
    • Remove the back casing.

    • The casing itself is sturdy so don't be afraid to remove it forcefully.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Trystan Jasperson

Member since: 17-03-2018

231 reputação

2 Guides authored

Equipe

Baylor, Team S5-G4, Williams Spring 2018 Membro de Baylor, Team S5-G4, Williams Spring 2018

BU-WILLIAMS-S18S5G4

3 Membros

5 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 9

Todo: 85