Introdução

The Sony Clie PEG-UX50 has a separate tilt screen mechanism that does not require the user to dismantle the battery plate in order to get to the display .

Peças

Não são necessárias peças.

Take off the screws located on the 2 sides of the tilt screen. Unscrew the screw located at the tilt base of the screen Unscrew the screw located at the tilt base of the screen
  • Take off the screws located on the 2 sides of the tilt screen.

  • Unscrew the screw located at the tilt base of the screen

Adicionar comentário

Gently remove back plate of tilt screen by sliding upward. With caution, lift wires from the track in the back plate With caution, lift wires from the track in the back plate
  • Gently remove back plate of tilt screen by sliding upward.

  • With caution, lift wires from the track in the back plate

Adicionar comentário

Disconnect the thin bus cable attached to the Integrated Circuit Disconnect the thin bus cable attached to the Integrated Circuit
  • Disconnect the thin bus cable attached to the Integrated Circuit

Adicionar comentário

Detach the plastic black frame from in between the plate and lcd. Do not disconnect the display from the board yet.
  • Detach the plastic black frame from in between the plate and lcd.

  • Do not disconnect the display from the board yet.

Adicionar comentário

Disconnect the thin connector from the face plate using the tweezer
  • Disconnect the thin connector from the face plate using the tweezer

Adicionar comentário

With your hands, quick-release and disconnect the thick cable
  • With your hands, quick-release and disconnect the thick cable

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Rishad R Rai

Member since: 28-04-2011

1 reputação

Autoria de 1 guia

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 7

Todo: 2,177