Conserte seus objetos Comunidade Loja

Sony Clie PEG-SL10 Motherboard Replacement

O que você precisa

  1. Sony Clie PEG-SL10 Motherboard Replacement, Motherboard: passo 1, imagem 1 %32

    • Remove the six screws holding the case together.

    Editar

  2. Sony Clie PEG-SL10 Motherboard Replacement: passo 2, imagem 1 %32

    • Remove the seven screws holding the motherboard to the device.

    Editar

  3. Sony Clie PEG-SL10 Motherboard Replacement: passo 3, imagem 1 %32

    • Unclip the battery harness power cable from the motherboard.

    Editar

  4. Sony Clie PEG-SL10 Motherboard Replacement: passo 4, imagem 1 %32

    • Unclip the scroll wheel power cable from the motherboard.

    Editar

  6. Sony Clie PEG-SL10 Motherboard Replacement: passo 5, imagem 1 %32

    • Pull the left clip to remove the cable.

    Editar

  7. Sony Clie PEG-SL10 Motherboard Replacement: passo 6, imagem 1 %32

    • Pull out the two clips from the center to remove the power cable.

    Editar

  8. Sony Clie PEG-SL10 Motherboard Replacement: passo 7, imagem 1 %32

    • Rotate the motherboard toward you to show the cables on the opposite side of the motherboard.

    Editar

  9. Sony Clie PEG-SL10 Motherboard Replacement: passo 8, imagem 1 %32

    • Extend both sides of the left clip to remove the power cable.

    Editar

  10. Sony Clie PEG-SL10 Motherboard Replacement: passo 9, imagem 1 %32

    • Pull out the center clip to remove the power cable.

    Editar

  11. Sony Clie PEG-SL10 Motherboard Replacement: passo 10, imagem 1 %32

    • Pull the right clip out to remove the right cable.

    Editar

  12. Sony Clie PEG-SL10 Motherboard Replacement: passo 11, imagem 1 %32

    • The motherboard is removed. To install the new motherboard, follow the directions in reverse.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 4 outros contribuidores

Emily

Membro desde: 10/18/11

3 Reputação

Autoria de 3 guias

Emblemas: 5

+2 outros emblemas

Equipe

James Madison, Team 1-4, Allen Fall 2011 Membro de James Madison, Team 1-4, Allen Fall 2011

JMU-ALLEN-F11S1G4

Membros da 3

Autoria de 4 guias

Um comentário

I have a full reset whenever I take the battery out to recharge it. Given that all replacement motherboards will be as old as the unit, is there anyway to fix the board (I presume it’s a capacitor or super cell that keeps the charge long enough to swap the battery over normally?). The three cells seem to be soldered onto the board, but I presume could be replaced?

Anyone know of a way to fix this?

Benjamin S. Leveritt - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 1,299