Conserte seus objetos Comunidade Loja

Sony Bloggie 3D Player Back Cover Replacement

Introdução

This guide will detail the steps necessary to remove the back cover of the Sony Bloggie 3D Player.

O que você precisa

  1. Sony Bloggie 3D Player Back Cover Replacement, Front Cover: passo 1, imagem 1 %32

    • Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.

    Editar

  2. Sony Bloggie 3D Player Back Cover Replacement: passo 2, imagem 1 %32 Sony Bloggie 3D Player Back Cover Replacement: passo 2, imagem 2 %32

    • Use a plastic opening tool to pry the cover open.

    • After the the cover is partly open as shown, remove the cover with your hands.

    Editar

  4. Sony Bloggie 3D Player Back Cover Replacement, Back Cover: passo 3, imagem 1 %32 Sony Bloggie 3D Player Back Cover Replacement, Back Cover: passo 3, imagem 2 %32
    Ferramenta utilizada nesse passo:
    Tweezers
    $4.99
    Comprar

    • Using your hand, or a pair of tweezers, remove the ZIF connector by gently pulling it out of the dock on the circuit board.

    Editar

  5. Sony Bloggie 3D Player Back Cover Replacement: passo 4, imagem 1 %32 Sony Bloggie 3D Player Back Cover Replacement: passo 4, imagem 2 %32

    • Use a plastic opening tool to loosen the back cover off the device.

    • Once the back cover is loose, remove it gently by hand.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 6 outros contribuidores

Timothy Tran

Membro desde: 01/30/13

1 Reputação

Autoria de 2 guias

Emblemas: 4

+1 outro emblema

Equipe

Cal Poly, Team 7-12, Maness Winter 2013 Membro de Cal Poly, Team 7-12, Maness Winter 2013

CPSU-MANESS-W13S7G12

Membros da 5

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 7

Duração total: 404