Introdução

A batteries' cycle life will only last for so many charges. In time the battery may no longer hold a charge to power your device. In this guide, we will show you how to change the battery of the Solio Rocsta.

  1. Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver. Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver.
    • Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver.

  2. Remove top cover. Caution: the solar cell is attached to the top cover and connected to the circuit board by a short wire .
    • Remove top cover.

    • Caution: the solar cell is attached to the top cover and connected to the circuit board by a short wire .

  3. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  4. Using the spudger, pry the battery off the back cover.
    • Using the spudger, pry the battery off the back cover.

  5. Using a T6 Torx screwdriver, unscrew the 5.66 mm screws attaching the circuit board to the case and flip the circuit board.
    • Using a T6 Torx screwdriver, unscrew the 5.66 mm screws attaching the circuit board to the case and flip the circuit board.

  6. With the circuit board flipped, locate the battery connector.
    • With the circuit board flipped, locate the battery connector.

    • Hold the component attached to the circuit board the battery is connected to and wiggle the cable out.

Conclusão

To reassemble your device, follow these instructions in reverse order.

David Vazquez

Member since: 10-10-2017

529 reputação

5 Guides authored

Equipe

USF Tampa, Team S13-G13, Cagle Fall 2017 Membro de USF Tampa, Team S13-G13, Cagle Fall 2017

USFT-CAGLE-F17S13G13

4 Membros

6 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 42