Ir para o conteúdo principal

Snowboard Binding Replacement

O que você precisa

  1. Snowboard Binding Replacement, Binding: passo 1, imagem 1 %32 Snowboard Binding Replacement, Binding: passo 1, imagem 2 %32 Snowboard Binding Replacement, Binding: passo 1, imagem 3 %32
    • Release the binding straps by lifting up on the buckle and pulling towards the direction of the end of the ladder.

    • Not all binding straps will release the same way. If you are having trouble releasing your binding straps, please refer to your owner's manual.

  2. Snowboard Binding Replacement: passo 2, imagem 1 %32 Snowboard Binding Replacement: passo 2, imagem 2 %32
    • Move the straps and the highback plate out of the way in order to have clear access to the foot pad screw.

    • The highback plate is the vertical support plate located on the heel side of the binding.

  3. Snowboard Binding Replacement: passo 3, imagem 1 %32 Snowboard Binding Replacement: passo 3, imagem 2 %32
    • Use a #2 Phillips screwdriver to remove the panhead, 10mm wide, M4 x 12mm screw located in the middle of the foot pad.

  4. Snowboard Binding Replacement: passo 4, imagem 1 %32 Snowboard Binding Replacement: passo 4, imagem 2 %32 Snowboard Binding Replacement: passo 4, imagem 3 %32
    • Use a #2 Phillips screwdriver to remove the four ovalhead M6 x 12mm screws that attach the base plate of the binding to the board.

    • Lift or slide the binding off the board and set the screws aside.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Loren Sunding

Membro desde: 01/14/14

118 Reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 17-4, Forte Winter 2014 Membro de Cal Poly, Team 17-4, Forte Winter 2014

CPSU-FORTE-W14S17G4

Membros da 5

Autoria de 9 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 12

Últimos 30 dias: 94

Duração total: 13,385