Ir para o conteúdo principal

Slingbox 500 Top Cover Replacement

O que você precisa

  1. Slingbox 500 Top Cover Replacement, Top Cover: passo 1, imagem 1 %32
    • Remove the sticker on the back of the Slingbox that covers the rear screws using a spudger.

  2. Slingbox 500 Top Cover Replacement: passo 2, imagem 1 %32 Slingbox 500 Top Cover Replacement: passo 2, imagem 2 %32
    • Remove the seven 7.9 mm rear screws from the device using a Phillips #1 screwdriver.

    • Flip your Slingbox so the bottom is facing upwards.

    • Remove the four 7.9 mm screws using a Phillips #1 screwdriver.

    • You may have rubber feet on the bottom of your Slingbox. If you do, just gently remove them with your hands and set them aside to put back on later.

  3. Slingbox 500 Top Cover Replacement: passo 3, imagem 1 %32 Slingbox 500 Top Cover Replacement: passo 3, imagem 2 %32 Slingbox 500 Top Cover Replacement: passo 3, imagem 3 %32
    • Remove the upper section of the case by rotating your Slingbox to view the back and lifting up on the higher corner.

    • Use the opening tool to disconnect the small clips in the front.

    • These may require some minor force to disconnect.

    • Remove the entire top of the Slingbox and set it aside.

Conclusão

To reassemble your device, follow these instructions in reverse order.

David Sullivan

Membro desde: 10/18/21

365 Reputação

Autoria de 3 guias

Equipe

UMass Dartmouth, Team 1-3, Simcock Fall 2021 Membro de UMass Dartmouth, Team 1-3, Simcock Fall 2021

UMASSD-SIMCOCK-F21S1G3

Membros da 4

Autoria de 3 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 75