Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

Is your motor running but the drill is not turning? Replace those gears to start providing torque to your drill bit.

Peças

Nenhum componente especificado.

  1. On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.
    • On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.

  2. Kit de pontas universal para chave

    112 bits for every fix.

    Upgrade Your Toolbox

    Kit de pontas universal para chave

    Upgrade Your Toolbox
  3. Pull the front housing apart from the rear. The motor and gears might fall out when you are pulling it apart.
    • Pull the front housing apart from the rear.

    • The motor and gears might fall out when you are pulling it apart.

  4. Remove gear from the divider and add the new gear. Remove gear from the divider and add the new gear.
    • Remove gear from the divider and add the new gear.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Matt

Membro desde: 10-10-2010

365 Reputação

7 Guias de autoria

Equipe

Cal Poly, Team 5-17, Maness Fall 2010 Membro de Cal Poly, Team 5-17, Maness Fall 2010

CPSU-MANESS-F10S5G17

3 Membros

7 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 1,876