Pular para o conteúdo principal

Introdução

How to replace the Antennae power port board in the docking station of a SiriusXM Onyx Plus radio.

Peças

Nenhum componente especificado.

  1. Remove the two 7.6mm Torx T6 screws from the back of the docking station. Remove the two 7.6mm Torx T6 screws from the back of the docking station.
    • Remove the two 7.6mm Torx T6 screws from the back of the docking station.

  2. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  3. Pull the back casing off.
    • Pull the back casing off.

  4. Once apart, lift the docking station motherboard up from the two pins that are located on the interior of the front casing.
    • Once apart, lift the docking station motherboard up from the two pins that are located on the interior of the front casing.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Angel Rivera

Membro desde: 25-01-2018

505 reputação

5 Guias de autoria

Equipe

USF Tampa, Team S7-G2, Passmore Spring 2018 Membro de USF Tampa, Team S7-G2, Passmore Spring 2018

USFT-PASSMORE-S18S7G2

4 Membros

5 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 11

Últimos 30 dias: 27

Todo: 275