Introdução

Taking out the thumbwheel.

Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.
  • Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.

  • Gently pry open button and remove button.

  • Do this for each of the 3 buttons remaining.

Adicionar comentário

The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.
  • The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.

Adicionar comentário

  • Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

Adicionar comentário

  • Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.

  • Use the Torx 6 screwdriver to remove these 2 screws.

  • Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

Adicionar comentário

  • After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.

  • You can use your hands to simply pull apart the top casing from the bottom casing.

Adicionar comentário

  • Remove 2 screws using the Torx 6 screwdriver.

Adicionar comentário

  • The thumbwheel and casing will be loose, gently remove it.

Adicionar comentário

Linha de Chegada

michael albaum

Member since: 20-01-2010

45 reputação

6 Guides authored

Equipe

Cal Poly, Team 3-19, Maness Winter 2010 Membro de Cal Poly, Team 3-19, Maness Winter 2010

CPSU-MANESS-W10S3G19

4 Membros

11 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 3

Todo: 2,045