Introdução

Taking out the LCD screen.

Peças

Não são necessárias peças.

  1. Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.
    • Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.

    • Gently pry open button and remove button.

    • Do this for each of the 3 buttons remaining.

  2. The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off. The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.
    • The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.

  3. Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.
    • Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

  4. Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.
    • Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.

    • Use the Torx 6 screwdriver to remove these 2 screws.

    • Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

  5. Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  6. After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.
    • After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.

    • You can use your hands to simply pull apart the top casing from the bottom casing.

  7. Flip the screen to its up position. Remove screen from keyboard.
    • Flip the screen to its up position.

    • Remove screen from keyboard.

  8. Remove 4 screws from back of screen.
    • Remove 4 screws from back of screen.

  9. Separate screen from housing with your fingers.
    • Separate screen from housing with your fingers.

  10. Remove 4 screws Pay attention to the orientation of the screen on the backing because it is difficult to reassemble. Pay attention to the orientation of the screen on the backing because it is difficult to reassemble.
    • Remove 4 screws

    • Pay attention to the orientation of the screen on the backing because it is difficult to reassemble.

  11. Remove LCD protective cover with your fingers.
    • Remove LCD protective cover with your fingers.

Linha de Chegada

2 outras pessoas concluíram este guia.

michael albaum

Member since: 20-01-2010

45 reputação

6 Guides authored

Equipe

Cal Poly, Team 3-19, Maness Winter 2010 Membro de Cal Poly, Team 3-19, Maness Winter 2010

CPSU-MANESS-W10S3G19

4 Membros

11 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 3,228