Introdução

To take the key board out for replacement.

Peças

Não são necessárias peças.

  1. Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.
    • Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.

    • Gently pry open button and remove button.

    • Do this for each of the 3 buttons remaining.

    Adicionar comentário

  2. The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.
    • The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.

    Adicionar comentário

    • Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

    Adicionar comentário

    • Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.

    • Use the Torx 6 screwdriver to remove these 2 screws.

    • Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

    Adicionar comentário

    • After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.

    • You can use your hands to simply pull apart the top casing from the bottom casing.

    Adicionar comentário

    • Remove screen from case

    Adicionar comentário

    • Remove both black "rivets" from the back of the case with the plastic opening tool.

    Adicionar comentário

    • Push keyboard out of the front of the casing with your thumbs.

    • Make sure not to press too hard; you may break the board.

    Adicionar comentário

Linha de Chegada

michael albaum

Member since: 20-01-2010

45 reputação

6 Guides authored

Equipe

Cal Poly, Team 3-19, Maness Winter 2010 Membro de Cal Poly, Team 3-19, Maness Winter 2010

CPSU-MANESS-W10S3G19

4 Membros

11 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 3

Todo: 1,767