Introdução

Speakers rely on precisely placed components to convert electronic signals into sound waves. Touching the speaker by pushing or pulling can cause the speaker components to deform. As a result, the speaker will no longer produce an accurate sound. Replacing the speaker is the best repair for speaker damage.

Unplug the speaker before doing any work on it. Use a #0 Phillips screwdriver to remove the eight 13mm Phillips head screws from the back panel.
  • Unplug the speaker before doing any work on it.

  • Use a #0 Phillips screwdriver to remove the eight 13mm Phillips head screws from the back panel.

Adicionar comentário

Remove the back panel.
  • Remove the back panel.

Adicionar comentário

Remove the snap cable that connects the speaker to the circuit board.
  • Remove the snap cable that connects the speaker to the circuit board.

Adicionar comentário

Use a tap hammer and a punch to release the 4 posts that hold the front panel in place. Use a tap hammer and a punch to release the 4 posts that hold the front panel in place.
  • Use a tap hammer and a punch to release the 4 posts that hold the front panel in place.

Adicionar comentário

Use a plastic opening tool or spudger to pry off the front panel. Use a plastic opening tool or spudger to pry off the front panel.
  • Use a plastic opening tool or spudger to pry off the front panel.

Adicionar comentário

Use a#4 Phillips screwdriver to remove the four 9.5mm screws that secure the subwoofer to the woofer box.
  • Use a#4 Phillips screwdriver to remove the four 9.5mm screws that secure the subwoofer to the woofer box.

Adicionar comentário

Remove the defective speaker.
  • Remove the defective speaker.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Linda Freund

Member since: 06-08-2017

205 reputação

2 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 12

Todo: 86