Introdução
Replace the digitizer on your Sharp Aquos Crystal.
O que você precisa
-
-
Peel back the back cover of the phone from the access point to remove it. It should come off easily using your hands.
-
-
-
Remove seven 3mm Star #5 screws shown in the picture with a screwdriver.
-
Remove two 3.5mm Star #5 screws shown in the picture with a screwdriver.
-
Remove two 5mm Star #5 screws shown in the picture with a screwdriver.
-
-
Quase terminado!
To reassemble your device, follow these instructions in reverse order.
Conclusão
To reassemble your device, follow these instructions in reverse order.