Conserte seus objetos Comunidade Loja

Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement

Introdução

When the roller brush is not spinning because of blockage or damage, you might want to consider replacing it.

O que você precisa

  1. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement, Roller Brush: passo 1, imagem 1 %32 Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement, Roller Brush: passo 1, imagem 2 %32

    • Push the red Lift Away button down and lift up on the vacuum handle to detach the base.

    • The handle was removed for convenience but is not required.

    Editar

  2. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 2, imagem 1 %32

    • Turn over the vacuum to reveal the roller brush.

    Editar

  3. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 3, imagem 1 %32 Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 3, imagem 2 %32

    • Pry the small wheels at the bottom of the base using the plastic opening tool.

    Editar

  4. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 4, imagem 1 %32 Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 4, imagem 2 %32

    • Using a coin, turn the big white knobs located above the roller brush counter-clockwise.

    Editar

  6. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 5, imagem 1 %32 Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 5, imagem 2 %32 Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 5, imagem 3 %32

    • Lift up the suction hose to reveal a screw.

    • Remove the 12.7 mm Phillips #02 screw.

    Editar

  7. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 6, imagem 1 %32 Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 6, imagem 2 %32

    • Remove eight 12.7mm screws located under the vacuum using a Phillips #02 screwdriver.

    • Remove two 12.7 mm screws located next to the wheels with a Phillips #02 screwdriver.

    • The two screws located next to the wheels are smaller in diameter.

    Editar

  8. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 7, imagem 1 %32 Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 7, imagem 2 %32 Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 7, imagem 3 %32

    • Turn the vacuum upright and pull the white upper section of the brush roller circuit housing.

    • Be careful when lifting the housing as there is a connector attached.

    Editar

  9. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 8, imagem 1 %32 Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 8, imagem 2 %32

    • Remove the connector attached to the circuit boards using a plastic opening tool.

    Editar

  10. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 9, imagem 1 %32 Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 9, imagem 2 %32 Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 9, imagem 3 %32

    • Remove the two 12.7 mm screws located at the top of the clear plastic brush roller housing using a Phillips #02 screwdriver.

    • Lift the clear plastic brush roller housing.

    Editar

  11. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 10, imagem 1 %32 Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: passo 10, imagem 2 %32

    • Wiggle the brush roller upwards from the left and right side slots.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Daniel Ceja

Membro desde: 01/24/19

277 Reputação

Autoria de 2 guias

Emblemas: 6

+3 outros emblemas

Equipe

Cal Poly, Team S19-G3, White Winter 2019 Membro de Cal Poly, Team S19-G3, White Winter 2019

CPSU-WHITE-W19S19G3

Membros da 5

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 11

Duração total: 956