Conserte seus objetos Comunidade Loja

Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement

Introdução

This guide will show you how to replace the HEPA filter which is responsible for trapping small particles that can be easily recirculated into the air. When the HEPA Filter is extremely dirty, you may want to consider replacing it.

  1. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement, HEPA Filter: passo 1, imagem 1 %32 Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement, HEPA Filter: passo 1, imagem 2 %32

    • Push the red Lift Away button down and lift up on the vacuum handle to detach the base.

    • The handle was removed for convenience but is not required.

    Editar

  3. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: passo 2, imagem 1 %32 Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: passo 2, imagem 2 %32

    • Remove the red cover from the front of the vacuum by pulling the latch found at the bottom of the cover forward and moving the whole cover downward.

    Editar

  4. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: passo 3, imagem 1 %32 Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: passo 3, imagem 2 %32

    • Remove the filter by pulling it straight out.

    • To clean the filter, rinse it under water and allow it to dry before placing it back in the vacuum.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 4 outros contribuidores

Carson Craft

Membro desde: 01/24/18

251 Reputação

Autoria de 1 guia

Emblemas: 10

+7 outros emblemas

Equipe

Cal Poly, Team S19-G3, White Winter 2019 Membro de Cal Poly, Team S19-G3, White Winter 2019

CPSU-WHITE-W19S19G3

Membros da 5

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 7

Duração total: 356