Introdução

The HEPA filter removes at least 99% of airborne particles such as pollen and dander. This guide allows you to access this filter, which is trickier to get to than the other filters.

  1. Look towards the side of the vacuum for the orange "Floor Nozzle" button.
    • Look towards the side of the vacuum for the orange "Floor Nozzle" button.

    • Press the "Floor Nozzle" button and pull out the body of the vacuum up and away from the floor motor.

    Adicionar comentário

  2. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
  3. Locate an orange dial at the bottom of the  now-separate body of the vacuum.
    • Locate an orange dial at the bottom of the now-separate body of the vacuum.

    • Turn the dial so that it is pointed towards the open-lock icon.

    Adicionar comentário

    • Open the cap to reveal the HEPA filter. The HEPA filter is a large grey rectangle with a tab on the side.

    • Press the tab, and pull out the filter.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

David Chau

Member since: 24-01-2018

121 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team S18-G6, Livingston Winter 2018 Membro de Cal Poly, Team S18-G6, Livingston Winter 2018

CPSU-LIVINGSTON-W18S18G6

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 22

Todo: 173