Conserte seus objetos Comunidade Loja

Shark Rocket HV381 Brush Replacement

Introdução

This guide will tell you step by step how to replace a malfunctioning Brush. on the Shark Rocket HV381.

  1. Shark Rocket HV381 Brush Replacement, Brush: passo 1, imagem 1 %32 Shark Rocket HV381 Brush Replacement, Brush: passo 1, imagem 2 %32

    • On the top of the vacuum head is two grey "Brush Roller Access" buttons. Simultaneously press both buttons to eject the Roller Cover. Remove the Roller Cover by pulling it towards you and up.

    Editar

  3. Shark Rocket HV381 Brush Replacement: passo 2, imagem 1 %32 Shark Rocket HV381 Brush Replacement: passo 2, imagem 2 %32 Shark Rocket HV381 Brush Replacement: passo 2, imagem 3 %32

    • The "Pull Tab" tab is located at the right. Pull the Tab up and to the right for removal.

    • The Brush is sticky so hold the vacuum head with one hand and give the tab a moderate tug.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Duração total: 687