Shark Professional Steam Pocket Mop Water Tank Cap Replacement

Introdução

Mineral buildup can occur when the water tank cap is not loosened before storing or if the tank is not drained. In these situations the cap can become stuck inside the tank. When this occurs, the cap is often lost or misplaced, which leads to a replacement.

Passo 1 Water Tank Cap

Shark Professional Steam Pocket Mop Water Tank Cap Replacement, Water Tank Cap: passo 1, imagem 1 %32

Shark Professional Steam Pocket Mop Water Tank Cap Replacement, Water Tank Cap: passo 1, imagem 2 %32

Turn off the Steam Pocket Mop and unplug it from the wall.
Be sure that the water in the water tank cools to room temperature before proceeding.

Editar

Passo 2

Shark Professional Steam Pocket Mop Water Tank Cap Replacement: passo 2, imagem 3 %32

Remove the water tank cap from the water tank reservoir.
Turn the cap towards the upward position.
Rotate counter-clockwise until it loosens.
When reassembling, align the grooves of new water tank cap with the opening of water tank reservoir and then push in.

Editar

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

Tyler Wicke

Membro desde: 10/17/18

237 Reputação

Autoria de 2 guias

Emblemas: 6

+3 outros emblemas

Equipe

UW Tacoma, Team S1-G3, Rose Fall 2018 Membro de UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

Membros da 4

Autoria de 10 guias

12 comentários

Need a water cap for S3901 N3 11 Shark steam mop. They said they discontinued and I have ordered two online and neither will work. And I really going to have to buy a new one?

shannon poole - 9 de fev de 2019 Responder