Conserte seus objetos Comunidade Loja

Shark Professional Steam Pocket Mop Head Replacement

Introdução

If you need to replace or re-install the mop head of your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed.

  1. Shark Professional Steam Pocket Mop Head Replacement, Mop Head: passo 1, imagem 1 %32 Shark Professional Steam Pocket Mop Head Replacement, Mop Head: passo 1, imagem 2 %32

    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

    Editar

  3. Shark Professional Steam Pocket Mop Head Replacement: passo 2, imagem 1 %32 Shark Professional Steam Pocket Mop Head Replacement: passo 2, imagem 2 %32 Shark Professional Steam Pocket Mop Head Replacement: passo 2, imagem 3 %32

    • Push down on the round, grey release button near the connection point, while pulling the mop head out.

    • The mop head should slide out and detach.

    • When reassembling, you should hear it click into place if it is properly installed.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Tyler Wicke

Membro desde: 10/17/18

237 Reputação

Autoria de 2 guias

Emblemas: 6

+3 outros emblemas

Equipe

UW Tacoma, Team S1-G3, Rose Fall 2018 Membro de UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

Membros da 4

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 30

Duração total: 1,854