Introdução

If your roller brush is not working even after removing surrounding debris, it is time to replace the roller brush.

Peças

Não são necessárias peças.

Remove the black rubber band from the roller brush In most models there will be a plastic cover over the rubber band. You will use the quarter to twist the latch and take off the cover
  • Remove the black rubber band from the roller brush

  • In most models there will be a plastic cover over the rubber band. You will use the quarter to twist the latch and take off the cover

Adicionar comentário

Use the bristles to pull the end of the brush that was connected to the belt away from the vacuum. Use the bristles to pull the end of the brush that was connected to the belt away from the vacuum. Use the bristles to pull the end of the brush that was connected to the belt away from the vacuum.
  • Use the bristles to pull the end of the brush that was connected to the belt away from the vacuum.

Adicionar comentário

Slide the roller belt off of the roller brush and pull the roller away from the motorized brush. Slide the roller belt off of the roller brush and pull the roller away from the motorized brush. Slide the roller belt off of the roller brush and pull the roller away from the motorized brush.
  • Slide the roller belt off of the roller brush and pull the roller away from the motorized brush.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Zachary Liu

Member since: 24-01-2018

499 reputação

5 Guides authored

Equipe

Cal Poly, Team S1-G5, Livingston Winter 2018 Membro de Cal Poly, Team S1-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G5

4 Membros

5 Guides authored

but where can I buy the brush for model SV1106?

ellenmccarthycalif - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 18

Últimos 30 dias: 52

Todo: 175