Introdução

Replace the battery when the vacuum does not turn on even after charging.

Turn the device over to reveal the bottom of the motorized brush head.
  • Turn the device over to reveal the bottom of the motorized brush head.

Adicionar comentário

Slide the latch next to the panel upwards into the unlocked position. Slide the latch next to the panel upwards into the unlocked position.
  • Slide the latch next to the panel upwards into the unlocked position.

Adicionar comentário

Slide the panel to the right to reveal the battery.
  • Slide the panel to the right to reveal the battery.

Adicionar comentário

Pull the battery from the vacuum. Pull the battery from the vacuum.
  • Pull the battery from the vacuum.

Adicionar comentário

Disconnect the battery from the vacuum by pinching the white latch and pulling the two pieces apart. Disconnect the battery from the vacuum by pinching the white latch and pulling the two pieces apart.
  • Disconnect the battery from the vacuum by pinching the white latch and pulling the two pieces apart.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Zachary Liu

Member since: 24-01-2018

499 reputação

5 Guides authored

Equipe

Cal Poly, Team S1-G5, Livingston Winter 2018 Membro de Cal Poly, Team S1-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G5

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 6

Últimos 7 dias: 39

Últimos 30 dias: 178

Todo: 570