Conserte seus objetos Comunidade Loja

Shark Flex DuoClean Suction Motor Replacement

Introdução

Following this guide requires cutting wires and soldering. For more information on soldering visit the soldering guide.

O que você precisa

  1. Shark Flex DuoClean Suction Motor Replacement, Dust Cup: passo 1, imagem 1 %32 Shark Flex DuoClean Suction Motor Replacement, Dust Cup: passo 1, imagem 2 %32

    • Squeeze Dust Cup release buttons on either side of the component.

    • Pull up to release Dust Cup.

    Editar

  2. Shark Flex DuoClean Suction Motor Replacement, Suction Motor: passo 2, imagem 1 %32

    • Remove the five 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.

    Editar

  3. Shark Flex DuoClean Suction Motor Replacement: passo 3, imagem 1 %32

    • Use the iFixit opening tool to remove the top component.

    Editar

  5. Shark Flex DuoClean Suction Motor Replacement: passo 4, imagem 1 %32

    • Remove the two 15mm screws by twisting counterclockwise using the T10 Torx screwdriver.

    Editar

  6. Shark Flex DuoClean Suction Motor Replacement: passo 5, imagem 1 %32

    • Remove the two 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.

    Editar

  7. Shark Flex DuoClean Suction Motor Replacement: passo 6, imagem 1 %32

    • Remove the two 15 mm screws holding the motor cover by twisting counterclockwise with a T10 Torx screwdriver.

    Editar

  8. Shark Flex DuoClean Suction Motor Replacement: passo 7, imagem 1 %32

    • Cut the zip ties holding the motor using the wire cutter.

    Editar

  9. Shark Flex DuoClean Suction Motor Replacement: passo 8, imagem 1 %32

    • Cut the wires using the wire cutters to completely remove the motor.

    • For reassembly, use the soldering guide in the Introduction.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Autor(a)

com 2 outros contribuidores

Christian Fuller

Membro desde: 10/08/18

420 Reputação

Autoria de 3 guias

Emblemas: 11

+8 outros emblemas

Equipe

Cal Poly, Team S17-G5, White Fall 2018 Membro de Cal Poly, Team S17-G5, White Fall 2018

CPSU-WHITE-F18S17G5

Membros da 4

Autoria de 14 guias

Um comentário

how i need to know how to re connect the wires on replacing a new motor, my model is similar HV321.

andrea - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 10

Últimos 30 dias: 27

Duração total: 3,479