Ir para o conteúdo principal

Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement

O que você precisa

  1. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement, PCB (Printed Circuit Board): passo 1, imagem 1 %32
    • Use the Phillips #2 screwdriver to remove the four 6 mm screws by unscrewing counterclockwise.

  2. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: passo 2, imagem 1 %32
    • Pull the front and back cover apart.

    • Be careful not to pull the front cover off completely. It holds the wires.

  3. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: passo 3, imagem 1 %32
    • Remove the Phillips 6 mm screw that holds the circuit board to the outer shell of the fan.

    • Shock warning: Make sure the fan is unplugged before removing the circuit board.

  4. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: passo 4, imagem 1 %32
    • Remove the top cover containing the circuit board and the wires by pulling it away from the outer shell of the fan.

  5. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: passo 5, imagem 1 %32 Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: passo 5, imagem 2 %32
    • Remove the screws from the four corners of the circuit board.

    • Remove the circuit board from the top cover.

    • Do not touch the other side of the circuit board to avoid damaging the circuit elements.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Mateo Begue

Membro desde: 09/26/12

102 Reputação

Autoria de 2 guias

Equipe

Cal Poly, Team 15-46, Forte Fall 2012 Membro de Cal Poly, Team 15-46, Forte Fall 2012

CPSU-FORTE-F12S15G46

Membros da 5

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 9

Duração total: 1,475