Conserte seus objetos Comunidade Loja

Sega Game Gear Screen Replacement

Introdução

A guide to installing a replacement screen on a Sega Game Gear.

O que você precisa

  1. Sega Game Gear Screen Replacement, Battery: passo 1, imagem 1 %32

    • Place your device upside down and locate the two battery compartments.

    Editar

  2. Sega Game Gear Screen Replacement: passo 2, imagem 1 %32

    • Press on the tabs at the bottom of the battery covers then lift up to remove.

    • Remove batteries if they are present.

    Editar

  3. Sega Game Gear Screen Replacement, Case: passo 3, imagem 1 %32

    • Remove the following screws:

    • Six Phillips screws

    • One 4.5 mm Gamebit screw

    Editar

  4. Sega Game Gear Screen Replacement: passo 4, imagem 1 %32
    Ferramenta utilizada neste passo:
    Tweezers
    $4.99
    Comprar

    • Use tweezers to take all other screws out.

    Editar

  6. Sega Game Gear Screen Replacement: passo 5, imagem 1 %32 Sega Game Gear Screen Replacement: passo 5, imagem 2 %32

    • Gently open the case by unfolding it over the top of the Sega Game Gear.

    • Do not pull the back of the case away, as cables are connected between both sides.

    Editar

  7. Sega Game Gear Screen Replacement: passo 6, imagem 1 %32 Sega Game Gear Screen Replacement: passo 6, imagem 2 %32 Sega Game Gear Screen Replacement: passo 6, imagem 3 %32

    • Carefully unplug the 2 white-tipped connectors on the top cover.

    Editar

  8. Sega Game Gear Screen Replacement, Screen: passo 7, imagem 1 %32

    • Unscrew all the marked screws.

    Editar

  9. Sega Game Gear Screen Replacement: passo 8, imagem 1 %32

    • Slide the logic board out from under the circular black fastener at the top-left corner of the case.

    Editar

  10. Sega Game Gear Screen Replacement: passo 9, imagem 1 %32

    • Place the board onto a flat surface.

    • Small plastic buttons may fall off during this process, save them in a container or a place where they could be found later on.

    Editar

  11. Sega Game Gear Screen Replacement: passo 10, imagem 1 %32

    • Unscrew the marked screws.

    • Flip the board, having its back facing up.

    • Hold onto the screen in the back, as it will flip open if not held onto.

    Editar

  12. Sega Game Gear Screen Replacement: passo 11, imagem 1 %32 Sega Game Gear Screen Replacement: passo 11, imagem 2 %32

    • Make sure the screen is towards the bottom, as indicated in the second picture.

    Editar

  13. Sega Game Gear Screen Replacement: passo 12, imagem 1 %32 Sega Game Gear Screen Replacement: passo 12, imagem 2 %32

    • Gently open the screen up.

    • The screen will not come out all the way since it is glued onto the top side.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

14 outras pessoas executaram este guia.

Autor(a)

com 5 outros contribuidores

Lauren Thurston

Membro desde: 04/15/10

469 Reputação

Autoria de 3 guias

Emblemas: 15

+12 outros emblemas

Equipe

Cal Poly, Team 28-33, Regan Spring 2010 Membro de Cal Poly, Team 28-33, Regan Spring 2010

CPSU-REGAN-S10S28G33

5 Membros

Autoria de 19 guias

9Comentários do guia

any one know where to get a new display that wont bleed me dry?

isaiah bellamy (masta ike) - Responder

Due to the nature a Game Gear screen attaches, a ribbon directly soldered to the mainboard, replacing it requires a soldering iron and some fairly advanced technique.

This guide, titled “Sega Game Gear Screen Replacement”, only takes us to the point you remove the ribbon. There is much work left.

Anthony Bessel - Responder

so, uh, is there a more comprehensive version somewhere?

rollin -

Does the screen get fixed at the end?

Caedmon O’Brien - Responder

SadlySadly, in step 7 you missed a screw location

talliesine - Responder

Comentar

Visualizações:

Últimas 24 horas: 10

Últimos 7 dias: 63

Últimos 30 dias: 244

Ao todo: 68,055