Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

The purpose of this replacement guide is to remove the Sega plastic casing to expose the internal content for further repair.

Peças

Nenhum componente especificado.

  1. Using a Phillips head screwdriver remove  six screws from the bottom of the console. The six screws are marked.
    • Using a Phillips head screwdriver remove six screws from the bottom of the console.

    • The six screws are marked.

  2. Remove the two screws that attach the Genesis' connector to the rest of the console.
    • Remove the two screws that attach the Genesis' connector to the rest of the console.

    • The two screws are marked in the diagram.

  3. Slide the lock tab to the left to separate the halves of the console.
    • Slide the lock tab to the left to separate the halves of the console.

  4. Lift from the left side to remove the top of the case.
    • Lift from the left side to remove the top of the case.

  5. Using the spudger, pry the cover off of the Genesis attachment.
    • Using the spudger, pry the cover off of the Genesis attachment.

  6. Lift the top of the case to remove the cover.
    • Lift the top of the case to remove the cover.

  7. Remove the faceplate by pulling it up, then out.
    • Remove the faceplate by pulling it up, then out.

Conclusão

To reassemble the device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Ryan Kotzebue

Membro desde: 07-10-2010

259 Reputation

4 Guias de autoria

Equipe

Cal Poly, Team 5-14, Maness Fall 2010 Membro de Cal Poly, Team 5-14, Maness Fall 2010

CPSU-MANESS-F10S5G14

5 Membros

11 Guias de autoria

Adicione um comentário

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 10

All Time: 4,322