Ir para o conteúdo principal

Sanyo VPC-X1200 flash replacement

O que você precisa

  1. Sanyo VPC-X1200 flash replacement, Back Case: passo 1, imagem 1 %32 Sanyo VPC-X1200 flash replacement, Back Case: passo 1, imagem 2 %32 Sanyo VPC-X1200 flash replacement, Back Case: passo 1, imagem 3 %32
    • Remove the five case screws with a Phillips #00 Screwdriver.

    • Five 3.5mm Phillips Screws

  2. Sanyo VPC-X1200 flash replacement: passo 2, imagem 1 %32
    • Gently lift up the back cover and set aside.

  3. Sanyo VPC-X1200 flash replacement, LCD Screen: passo 3, imagem 1 %32 Sanyo VPC-X1200 flash replacement, LCD Screen: passo 3, imagem 2 %32
    • Gently lift up on the left side of the LCD and slowly pull it to the left side of the camera but do not remove entirely, there is a ribbon connector.

    • Be careful not to rip out the ribbon connector.

  4. Sanyo VPC-X1200 flash replacement: passo 4, imagem 1 %32 Sanyo VPC-X1200 flash replacement: passo 4, imagem 2 %32
    • To clear the ribbon connection underneath the screen, lift up the black ribbon gate with the spudger.

    • Gently lift ribbon out of the gate and set screen aside.

  5. Sanyo VPC-X1200 flash replacement, Button Plate: passo 5, imagem 1 %32 Sanyo VPC-X1200 flash replacement, Button Plate: passo 5, imagem 2 %32
    • There are five screws of three different sizes which need removal.

    • One 4.5mm screw

    • Four 3.5mm screws, one on the button side

    • One 5.5mm screws

  6. Sanyo VPC-X1200 flash replacement: passo 6, imagem 1 %32 Sanyo VPC-X1200 flash replacement: passo 6, imagem 2 %32
    • Slowly lift metal tray to the right.

    • Be careful not to bend the screw tabs or rip out the ribbon cable.

    • Remove ribbon cable by using the spudger to lift up the black ribbon gate to release the ribbon

  7. Sanyo VPC-X1200 flash replacement, Lens Unit: passo 7, imagem 1 %32
    • Disconnect the two ribbon cables from the lens unit by using the spudger to lift the ribbon gates.

    • One gate is black and another is white.

  8. Sanyo VPC-X1200 flash replacement: passo 8, imagem 1 %32 Sanyo VPC-X1200 flash replacement: passo 8, imagem 2 %32
    • Remove the three silver screws.

    • Three 5.5mm screws

  9. Sanyo VPC-X1200 flash replacement: passo 9, imagem 1 %32
    • Lift the lens unit free of the camera. A spudger can be used to separate the lens unit if necessary.

  10. Sanyo VPC-X1200 flash replacement, Flash Lens: passo 10, imagem 1 %32 Sanyo VPC-X1200 flash replacement, Flash Lens: passo 10, imagem 2 %32 Sanyo VPC-X1200 flash replacement, Flash Lens: passo 10, imagem 3 %32
    • Remove 4 screws attached to the exterior silver bezel.

    • Four 3.5mm screws

  11. Sanyo VPC-X1200 flash replacement: passo 11, imagem 1 %32
    • Remove round silver bezel from the front of the camera.

  12. Sanyo VPC-X1200 flash replacement: passo 12, imagem 1 %32
    • Remove the two screws on the bottom of the front cover.

  13. Sanyo VPC-X1200 flash replacement: passo 13, imagem 1 %32
    • Remove tripod mount.

  14. Sanyo VPC-X1200 flash replacement: passo 14, imagem 1 %32
    • Carefully lift off the front cover plate of the camera.

  15. Sanyo VPC-X1200 flash replacement: passo 15, imagem 1 %32
    • Remove the flash lens using the spudger or a finger.

    • It will be attached by a piece of tape, peel the lens off of that piece of tape without removing the tape.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Equipe

Cal Poly, Team 7-10, Maness Spring 2010 Membro de Cal Poly, Team 7-10, Maness Spring 2010

CPSU-MANESS-S10S7G10

Membros da 4

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 2,104