Introdução

This guide will help you remove and replace the LCD screen.

Peças

Não são necessárias peças.

  1. Remove the five case screws with a Phillips #00 Screwdriver.
    • Remove the five case screws with a Phillips #00 Screwdriver.

    • Five 3.5mm Phillips Screws

    Adicionar comentário

  2. Gently lift up the back cover and set aside.
    • Gently lift up the back cover and set aside.

    Adicionar comentário

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Gently lift up on the left side of the LCD and slowly pull it to the left side of the camera but do not remove entirely, there is a ribbon connector.

    • Be careful not to rip out the ribbon connector.

    Adicionar comentário

    • To clear the ribbon connection underneath the screen, lift up the black ribbon gate with the spudger.

    • Gently lift ribbon out of the gate and set screen aside.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Anthony Giardina

Member since: 19-04-2010

20 reputação

7 Guides authored

Equipe

Cal Poly, Team 7-10, Maness Spring 2010 Membro de Cal Poly, Team 7-10, Maness Spring 2010

CPSU-MANESS-S10S7G10

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 4,887