Conserte seus objetos Comunidade Loja

Sansa e260R Memory Board Replacement

O que você precisa

  1. Sansa e260R Memory Board Replacement, Rear Case: passo 1, imagem 1 %32

    • Before disassembling the device, make sure it is powered off.

    • Remove the four 1.5mm screws on the back of the device.

    Editar

  2. Sansa e260R Memory Board Replacement: passo 2, imagem 1 %32

    • Using a plastic opening tool, lift the metal backing from the front of the device.

    Editar

  3. Sansa e260R Memory Board Replacement: passo 3, imagem 1 %32

    • Pull the rear panel off of the Sansa e260R.

    Editar

  4. Sansa e260R Memory Board Replacement, Battery: passo 4, imagem 1 %32

    • Grip the bottom of the battery with your thumb and forefinger and pull it away from the device.

    Editar

  6. Sansa e260R Memory Board Replacement, Front Panel: passo 5, imagem 1 %32

    • Remove the four 1.5mm screws on the inner casing of the device.

    • These screws are very small and hard to extract from the casing. It may be helpful to use a magnetic screwdriver.

    Editar

  7. Sansa e260R Memory Board Replacement: passo 6, imagem 1 %32

    • Flip the device so that the front is facing you.

    • Slide a plastic opening tool between the plastic front cover and the metal back cover of the device.

    Editar

  8. Sansa e260R Memory Board Replacement: passo 7, imagem 1 %32 Sansa e260R Memory Board Replacement: passo 7, imagem 2 %32

    • Pull the front cover away from the rest of the device.

    Editar

  9. Sansa e260R Memory Board Replacement, Memory Board: passo 8, imagem 1 %32 Sansa e260R Memory Board Replacement, Memory Board: passo 8, imagem 2 %32

    • Near the charging port, pull the case away from the motherboard to create clearance to remove the motherboard.

    • Use the spudger to push the motherboard in and pop the metal edge of the charging port up and inside the plastic case.

    Editar

  10. Sansa e260R Memory Board Replacement: passo 9, imagem 1 %32

    • Pull the bottom of the motherboard up and then out.

    Editar

  11. Sansa e260R Memory Board Replacement: passo 10, imagem 1 %32

    • On the back of the motherboard, there is a rectangle of rubber.

    • Peel the rectangle off slowly.

    Editar

  12. Sansa e260R Memory Board Replacement: passo 11, imagem 1 %32

    • Under the rubber rectangle, there is a strip of black tape.

    • Peel the tape off about halfway so that it is no longer attached to the memory board.

    Editar

  13. Sansa e260R Memory Board Replacement: passo 12, imagem 1 %32

    • Carefully peel the memory board away from the rest of the motherboard

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

6 outras pessoas executaram este guia.

Autor(a)

com 4 outros contribuidores

JenniferW

Membro desde: 01/31/12

194 Reputação

Autoria de 2 guias

Emblemas: 11

+8 outros emblemas

Equipe

Cal Poly, Team 8-15, Maness Winter 2012 Membro de Cal Poly, Team 8-15, Maness Winter 2012

CPSU-MANESS-W12S8G15

Membros da 5

Autoria de 5 guias

Um comentário

thanks a million for this. i accidentally erased the boot partition, bought another one on eBay with a defective audio channel and switched the memory board: eureka! i’m happy listening to my tunes again!

Admin User - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 4

Últimos 30 dias: 7

Duração total: 2,566