Peças

Não são necessárias peças.

  1. Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.
    • Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.

    • To ensure you don't lose any tiny parts during the replacement process, place parts on the white magnetic sheet.

    • Once the screws have been removed, proceed to take off back cover.

    Adicionar comentário

  2. Now, proceed to lift the battery out and remove it.
    • Now, proceed to lift the battery out and remove it.

    Adicionar comentário

    • Use a #0 Phillips screwdriver to remove the four small silver screws from the outside corners of the battery housing.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Now gently pry the front cover off. A Black Spudger can be used to assist in the removal of the cover.

    Adicionar comentário

    • Gently separate the mainboard from the battery housing. This may be difficult around the headphone jack. Use a spudger if necessary.

    • Pull the motherboard out and down away from the top of the phone.

    Adicionar comentário

    • Peel off the small foam rectangle on the back of the mainboard and set to the side.

    • Peel off the black tape and set off to the side.

    Adicionar comentário

    • Gently pry up the memory chip and replace it with the new one.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Lauren

Member since: 13-02-2014

43 reputação

2 Guides authored

Equipe

Ohio State, Team 1-4, Buehl Spring 2014 Membro de Ohio State, Team 1-4, Buehl Spring 2014

OSU-BUEHL-S14S1G4

3 Membros

3 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 578