1. Pry up the small black piece of plastic located between the volume [-] button and the HOLD/ON button.
    • Pry up the small black piece of plastic located between the volume [-] button and the HOLD/ON button.

  2. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  3. Underneath the piece of plastic you just removed, there is a small screw (Phillips #000, 2.0 mm long).  Use a Phillips #000 screwdriver to remove it.
    • Underneath the piece of plastic you just removed, there is a small screw (Phillips #000, 2.0 mm long). Use a Phillips #000 screwdriver to remove it.

  4. Push on the backplate with both thumbs, sliding it towards the top of the device. Once it begins to move, lift up slightly.  You can then slide the backplate all the way off.
    • Push on the backplate with both thumbs, sliding it towards the top of the device.

    • Once it begins to move, lift up slightly. You can then slide the backplate all the way off.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Andrew Groeneveld

Member since: 24-02-2014

495 reputação

4 Guides authored

Equipe

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 4

Todo: 435