Introdução

This is a step by step guide on how to replace the Samsung SPH-A500 logic board.

Peças

Não são necessárias peças.

Turn phone over
  • Turn phone over

  • Push the gray tab above the battery forward to remove the battery.

Adicionar comentário

Remove the battery from the phone, which will reveal four screws at the corners of the phone.
  • Remove the battery from the phone, which will reveal four screws at the corners of the phone.

Adicionar comentário

  • Remove all four screws using a small Philips screwdriver.

  • Note: The screws do not need to be completely removed from the case, as long as they are unscrewed.

Adicionar comentário

  • Remove back cover by carefully prying it open.

  • Note: Some force may be required.

Adicionar comentário

  • Pull the side tabs outward while simultaneously lifting up the circuit board.

  • Do not completely pull out the circuit board.

Adicionar comentário

  • Look for the clip at the top right corner of the logic board.

Adicionar comentário

  • Remove the clip from the logic board.

Adicionar comentário

  • Remove the logic board.

  • Replace the broken logic board with a new one.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Nick Dominikovic

Member since: 13-04-2010

139 reputação

8 Guides authored

Equipe

Cal Poly, Team 18-100, Johann Spring 2010 Membro de Cal Poly, Team 18-100, Johann Spring 2010

CPSU-JOHANN-S10S18G100

4 Membros

10 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,878