Introdução

Introduction

This guide will teach readers on how to replace the face plate of their Samsung SGH-X495. It will explain how to identify push pins and tabs and also how to remove them.

Peças

Não são necessárias peças.

First, remove the 2 silver stickers (as indicated by the circles) with a a safety or push pin to reveal 2 screws.
  • First, remove the 2 silver stickers (as indicated by the circles) with a a safety or push pin to reveal 2 screws.

Adicionar comentário

Remove the 2 (5.6 mm) philips head screws with your safety or push pin.
  • Remove the 2 (5.6 mm) philips head screws with your safety or push pin.

Adicionar comentário

As shown above, with a plastic pry tool, begin working at the top corner and down each side.  The face plate has 10 tabs that hook into the phone's body. Before removing the 2 tabs on the bottom, the 3 tabs on either side must be free first.
  • As shown above, with a plastic pry tool, begin working at the top corner and down each side. The face plate has 10 tabs that hook into the phone's body.

  • Before removing the 2 tabs on the bottom, the 3 tabs on either side must be free first.

  • Note: The bottom 2 are the most challenging to remove.

    • Note: When reassembling start with the bottom two tabs.

Adicionar comentário

Continue down each side toward the bottom with your pry tool. Note: It may help to use multiple pry tools to help hold it open.
  • Continue down each side toward the bottom with your pry tool.

  • Note: It may help to use multiple pry tools to help hold it open.

  • Second photo: location of the tabs.

Adicionar comentário

With 8 tabs released, the face plate is nearly free. With the phone in your left hand, gently wiggle the face plate from side to side and push the face place upward.
  • With 8 tabs released, the face plate is nearly free.

  • With the phone in your left hand, gently wiggle the face plate from side to side and push the face place upward.

  • Note: A strip of double sided tape holds the faceplate, so expect some resistance

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Matthew Hove

Member since: 05-01-2011

1.031 reputação

20 Guides authored

Equipe

Cal Poly, Team 3-40, Regan Winter 2011 Membro de Cal Poly, Team 3-40, Regan Winter 2011

CPSU-REGAN-W11S3G40

4 Membros

20 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Todo: 1,944