Pular para o conteúdo principal

Peças

Nenhum componente especificado.

  1. Use thumb nail to release the white hook; then use fingertip to pry the battery loose starting from the top. Second photo gives a view from the back of the phone and battery.
    • Use thumb nail to release the white hook; then use fingertip to pry the battery loose starting from the top.

    • Second photo gives a view from the back of the phone and battery.

  2. Remove the 4 (4.7mm) philips head screws.
    • Remove the 4 (4.7mm) philips head screws.

  3. Unplug the rubber charger outlet cover.
    • Unplug the rubber charger outlet cover.

  4. Unplug the rubber headset jack cover.
    • Unplug the rubber headset jack cover.

  5. Kits de reparo de android

    A new screen or battery is one kit away.

    Comprar agora

    Kits de reparo de android

    A new screen or battery is one kit away.

    Comprar agora
  6. Begin by inserting the pry tool near the charger jack. There are 4 tabs to release.
    • Begin by inserting the pry tool near the charger jack.

    • There are 4 tabs to release.

    • Start at the bottom and slide the tool up, lifting the silver front of the phone away from the white backing.

    • Loosen the 2 side tabs before moving on to the top two.

    • See the second photo to see location of the tabs.

    • Be careful of the ribbon wires shown in second photo.

  7. Once the two side tabs are free; gently pry the white backing down to release the top two tabs. Hold the phone with the left hand as shown
    • Once the two side tabs are free; gently pry the white backing down to release the top two tabs.

    • Hold the phone with the left hand as shown

    • Wiggle the white backplate from side to side while pulling down with the right hand.

    • Be careful of the ribbon wires shown in second photo.

  8. Remove the ribbon wires connecting to the screen using the pry tool.
    • Remove the ribbon wires connecting to the screen using the pry tool.

  9. 2 tabs hold the motherboard in place.
    • 2 tabs hold the motherboard in place.

    • Release the labeled tabs with the pry tool from the location shown.

  10. Separate the motherboard from the phone.
    • Separate the motherboard from the phone.

  11. Solder connections are accessable to replace the Chargers Jack.
    • Solder connections are accessable to replace the Chargers Jack.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Matthew Hove

Membro desde: 05-01-2011

1.031 reputação

10 Guias de autoria

Equipe

Cal Poly, Team 3-40, Regan Winter 2011 Membro de Cal Poly, Team 3-40, Regan Winter 2011

CPSU-REGAN-W11S3G40

4 Membros

20 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,521