Introdução

It may become necessary to replace the logic board on this cell phone in order to correct a problem. Following this guide will make removal quite easy.

Peças

Não são necessárias peças.

  1. Slide the latch on the back of the phone up.
    • Slide the latch on the back of the phone up.

    Adicionar comentário

  2. Remove the battery.
    • Remove the battery.

    Adicionar comentário

    • After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.

    Adicionar comentário

    • Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.

    Adicionar comentário

    • With a #0 Phillips screwdriver remove the screw which you just uncovered.

    Adicionar comentário

    • Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open.

    • Then disconnect the small power connector near the top of the phone.

    Adicionar comentário

    • Gently pry up the ribbon-type connector with the spudger.

    Adicionar comentário

    • Carefully pry the logic board from the case with the spudger.

    Adicionar comentário

Linha de Chegada

Nathan Brink

Member since: 11-04-2010

1 reputação

7 Guides authored

Equipe

Cal Poly, Team 34-59, Forte Spring 2010 Membro de Cal Poly, Team 34-59, Forte Spring 2010

CPSU-FORTE-S10S34G59

4 Membros

14 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 2,633