Introdução

The camera may become broken over time. This guide will assist in the replacement of the camera.

Peças

Não são necessárias peças.

Slide the latch on the back of the phone up.
  • Slide the latch on the back of the phone up.

Adicionar comentário

Remove the battery.
  • Remove the battery.

Adicionar comentário

After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.
  • After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.

Adicionar comentário

Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.
  • Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.

Adicionar comentário

With a #0 Phillips screwdriver remove the screw which you just uncovered.
  • With a #0 Phillips screwdriver remove the screw which you just uncovered.

Adicionar comentário

Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open. Then disconnect the small power connector near the top of the phone.
  • Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open.

  • Then disconnect the small power connector near the top of the phone.

Adicionar comentário

Gently pry up the ribbon-type connector with the spudger.
  • Gently pry up the ribbon-type connector with the spudger.

Adicionar comentário

Carefully pry the logic board from the case with the spudger.
  • Carefully pry the logic board from the case with the spudger.

Adicionar comentário

Once the logic board has been removed, peel the keypad up.
  • Once the logic board has been removed, peel the keypad up.

Adicionar comentário

When using a spudger the keypad housing comes off quite easily, although it may be necessary to guide the ribbon cable through the slot in the housing. When using a spudger the keypad housing comes off quite easily, although it may be necessary to guide the ribbon cable through the slot in the housing.
  • When using a spudger the keypad housing comes off quite easily, although it may be necessary to guide the ribbon cable through the slot in the housing.

Adicionar comentário

Remove screws with #0 Phillips screwdriver.
  • Remove screws with #0 Phillips screwdriver.

Adicionar comentário

Carefully pry apart the casing with the spudger tool.
  • Carefully pry apart the casing with the spudger tool.

Adicionar comentário

Use the spudger to carefully pry off the speaker.
  • Use the spudger to carefully pry off the speaker.

Adicionar comentário

Carefully pry off the ringer with the spudger.
  • Carefully pry off the ringer with the spudger.

Adicionar comentário

Carefully pry off the screen with the spudger.
  • Carefully pry off the screen with the spudger.

Adicionar comentário

Gently pry off the camera with the spudger.
  • Gently pry off the camera with the spudger.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Nathan Brink

Member since: 11-04-2010

1 reputação

7 Guides authored

Equipe

Cal Poly, Team 34-59, Forte Spring 2010 Membro de Cal Poly, Team 34-59, Forte Spring 2010

CPSU-FORTE-S10S34G59

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 4,029