Introdução

This guide will show a user how to take off the rubber door for replacement.

  1. Remove 4 screws from bottom of camera
    • Remove 4 screws from bottom of camera

    • Remove 2 screws from side of camera

    • Remove 2 screws from side of camera

      • Place Screws on magnetic surface or location where they will not roll away

    Adicionar comentário

  2. Squeeze area noted by blue square and pull outside shell apart from remaining camera.
    • Squeeze area noted by blue square and pull outside shell apart from remaining camera.

    Adicionar comentário

    • Remove 6 screws identified by red circles

    • Remove 3 screws identified by orange circles

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Gently remove orange circuit ribbon identified by red square

    • Gently remove narrow orange circuit ribbon identified by blue square

    Adicionar comentário

    • Be very cautious when using a soldering iron (they are on average 300 F)

    • Using a soldering iron, remove solder from wire identified by red circle

    • Using a soldering iron, remove solder from black and red wire identified by orange circle

    • Using a soldering iron, remove solder from wire identified by yellow circle

    Adicionar comentário

    • Using soldering iron, melt away solder and warm up metal located at top of circuit board as shown in picture

    • Repeat step two to three times until board feels flexible to bend

    • Slowly bend circuit board upwards (towards power button) until at 90 degree angle with remaining part of camera.

    Adicionar comentário

    • Remove black rubber door located on side of camera closest to lens using tweezers.

      • Be careful not to bend or tear the rubber when pulling out with tweezers as it may become difficult to put back in

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Todo: 147