Conserte seus objetos

Direito de executar reparos

Loja

Samsung NP-N102S-B05PH Hard Drive Replacement

Escrito Por: Daniel Rudzik (e 3 outros contribuidores)
  • Comentários: 0
  • Favoritos: 0
  • Execuções: 1

Dificuldade

Moderado

Passos

5

Tempo necessário

10 - 20 minutos

Partes

1

Sinalizadores

2

Markup Mishap

Acidente de Marcação

Este guia precisa de melhores marcações. Ajude corrigindo ou fazendo algumas marcações.

Needs More Images

Precisa de mais images

Mais algumas imagens faria os procedimentos deste guia ficarem mais claros.

Introdução

In this guide, we will open up the back case of the laptop and replace the hard drive.

Ferramentas

Comprar estas ferramentas

Peças

Nenhum componente especificado.

  1. Start off by powering down your laptop, equipping your anti-static wrist strap, and positioning your laptop upside-down.

    • Start off by powering down your laptop, equipping your anti-static wrist strap, and positioning your laptop upside-down.

    Editar

  2. Remove the assortment of 6.5mm Phillips #0 screws labeled in the picture.

    • Remove the assortment of 6.5mm Phillips #0 screws labeled in the picture.

    Editar

  4. Now it's time to break out your blue opening tool! Pry off the bottom cover, which is now attached only by plastic clasps.

    • Now it's time to break out your blue opening tool! Pry off the bottom cover, which is now attached only by plastic clasps.

    Editar

  5. Use a Phillips #0 screwdriver to remove the four 4.5mm bracket screws holding the hard drive onto the motherboard. Take care not to remove the screws holding the bracket to the motherboard, as you will need that bracket to attach the next hard drive. Take care not to remove the screws holding the bracket to the motherboard, as you will need that bracket to attach the next hard drive.

    • Use a Phillips #0 screwdriver to remove the four 4.5mm bracket screws holding the hard drive onto the motherboard.

    • Take care not to remove the screws holding the bracket to the motherboard, as you will need that bracket to attach the next hard drive.

    Editar

  6. Last, lift up the hard drive and gently pull off the SATA cable that is currently connected to the board. The hard drive is now fully removed from the laptop. Last, lift up the hard drive and gently pull off the SATA cable that is currently connected to the board. The hard drive is now fully removed from the laptop. Last, lift up the hard drive and gently pull off the SATA cable that is currently connected to the board. The hard drive is now fully removed from the laptop.

    • Last, lift up the hard drive and gently pull off the SATA cable that is currently connected to the board. The hard drive is now fully removed from the laptop.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor

com 3 outros contribuidores

Daniel Rudzik

Membro desde: 04/10/2016

349 Reputação

3 Guias de autoria

Emblemas: 7

+4 outros emblemas

Equipe

USF Tampa, Team 2-4, Nance Fall 2016 Membro de USF Tampa, Team 2-4, Nance Fall 2016

USFT-NANCE-F16S2G4

4 Membros

5 Guias de autoria

0 comentários

Adicionar um comentário

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 6

Últimos 30 dias: 34

Duração total: 975