Ir para o conteúdo principal

Samsung HMX-W300 Front Case Replacement

O que você precisa

  1. Samsung HMX-W300 Front Case Replacement, Disassembling Samsung HMX-W300: passo 1, imagem 1 %32 Samsung HMX-W300 Front Case Replacement, Disassembling Samsung HMX-W300: passo 1, imagem 2 %32 Samsung HMX-W300 Front Case Replacement, Disassembling Samsung HMX-W300: passo 1, imagem 3 %32
    • To remove the wristband of the device, grab the middle loop and pull the band through.

  2. Samsung HMX-W300 Front Case Replacement: passo 2, imagem 1 %32 Samsung HMX-W300 Front Case Replacement: passo 2, imagem 2 %32
    • Remove four screws with a Hex 1.5 mm screwdriver.

  3. Samsung HMX-W300 Front Case Replacement: passo 3, imagem 1 %32 Samsung HMX-W300 Front Case Replacement: passo 3, imagem 2 %32 Samsung HMX-W300 Front Case Replacement: passo 3, imagem 3 %32
    • Open the HDMI door on the side of the camera.

    • Remove the single screw using a Phillips #00 screwdriver.

  4. Samsung HMX-W300 Front Case Replacement: passo 4, imagem 1 %32 Samsung HMX-W300 Front Case Replacement: passo 4, imagem 2 %32 Samsung HMX-W300 Front Case Replacement: passo 4, imagem 3 %32
    • Use the iFixit opening tool on both sides on the device. Pry apart both sections with light force.

    • Do not apply too much force. There is a wire that attaches the front case with the rear case that can be damaged.

  5. Samsung HMX-W300 Front Case Replacement: passo 5, imagem 1 %32 Samsung HMX-W300 Front Case Replacement: passo 5, imagem 2 %32 Samsung HMX-W300 Front Case Replacement: passo 5, imagem 3 %32
    • Pull the wire ribbon out with a pair of tweezers.

  6. Samsung HMX-W300 Front Case Replacement, Battery: passo 6, imagem 1 %32 Samsung HMX-W300 Front Case Replacement, Battery: passo 6, imagem 2 %32
    • Remove the four screws from the battery housing using a Phillips #00 screwdriver.

  7. Samsung HMX-W300 Front Case Replacement: passo 7, imagem 1 %32
    • Use the iFixit opening tool to pry the battery housing open.

  8. Samsung HMX-W300 Front Case Replacement: passo 8, imagem 1 %32 Samsung HMX-W300 Front Case Replacement: passo 8, imagem 2 %32 Samsung HMX-W300 Front Case Replacement: passo 8, imagem 3 %32
    • After removing the battery housing, take the battery out.

  9. Samsung HMX-W300 Front Case Replacement, USB Port: passo 9, imagem 1 %32 Samsung HMX-W300 Front Case Replacement, USB Port: passo 9, imagem 2 %32 Samsung HMX-W300 Front Case Replacement, USB Port: passo 9, imagem 3 %32
    • Use an iFixit opening tool to pry up the plastic cover.

    • Use tweezers to remove the wire from the slots.

  10. Samsung HMX-W300 Front Case Replacement: passo 10, imagem 1 %32 Samsung HMX-W300 Front Case Replacement: passo 10, imagem 2 %32
    • Remove both screws from the USB port using a Phillips #00 screwdriver.

  11. Samsung HMX-W300 Front Case Replacement: passo 11, imagem 1 %32 Samsung HMX-W300 Front Case Replacement: passo 11, imagem 2 %32
    • Push the USB port inside the case to remove it from the device.

  12. Samsung HMX-W300 Front Case Replacement, Front Case: passo 12, imagem 1 %32
    • The front case is separated from the rest of the device.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Robert

Membro desde: 01/21/15

966 Reputação

Autoria de 8 guias

Equipe

USF Tampa, Team 9-2, Blackwell Winter 2015 Membro de USF Tampa, Team 9-2, Blackwell Winter 2015

USFT-BLACKWELL-W15S9G2

Membros da 4

Autoria de 16 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 308