Conserte seus objetos Comunidade Loja

Samsung Gear S Speaker Replacement

Introdução

This guide will show step by step instructions on how to replace the Samsung Gear S speaker.

O que você precisa

  1. Samsung Gear S Speaker Replacement, Display Assembly: passo 1, imagem 1 %32 Samsung Gear S Speaker Replacement, Display Assembly: passo 1, imagem 2 %32 Samsung Gear S Speaker Replacement, Display Assembly: passo 1, imagem 3 %32

    • Remove the wrist strap by peeling back the rubber starting from one corner of the watch face. Continue peeling the rubber away from the watch face until the strap is completely off.

    Editar

  2. Samsung Gear S Speaker Replacement: passo 2, imagem 1 %32 Samsung Gear S Speaker Replacement: passo 2, imagem 2 %32

    • Starting from an edge, wedge a metal spudger in between the screen and the chrome trim ring and pry, lifting the screen outwards.

    • Some force is needed due to adhesive seal.

    Editar

  3. Samsung Gear S Speaker Replacement: passo 3, imagem 1 %32

    • Use a plastic opening tool to gently pry upwards on the plastic motherboard assembly.

    Editar

  5. Samsung Gear S Speaker Replacement: passo 4, imagem 1 %32

    • Locate the ribbon assembly attaching the display to the motherboard.

    Editar

  6. Samsung Gear S Speaker Replacement: passo 5, imagem 1 %32

    • Use a plastic opening tool to detach the glass screen/ LED Display ribbon connector from the motherboard.

    Editar

  7. Samsung Gear S Speaker Replacement: passo 6, imagem 1 %32

    • Now the watch should be in three separate pieces.

    Editar

  8. Samsung Gear S Speaker Replacement, Speaker: passo 7, imagem 1 %32

    • Locate the speaker in the upper left corner of the housing.

    • Locate the speaker ribbon connector directly below the speaker.

    Editar

  9. Samsung Gear S Speaker Replacement: passo 8, imagem 1 %32

    • Use the plastic opening tool to gently pry upwards on the speaker's ribbon connector.

    Editar

  10. Samsung Gear S Speaker Replacement: passo 9, imagem 1 %32

    • Use the spudger to gently pry upwards on the speaker housing.

    • Note: The speaker housing is attached with adhesive, therefore, some force is required.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

Luis Franco

Membro desde: 09/03/15

1.076 Reputação

Autoria de 4 guias

Emblemas: 11

+8 outros emblemas

Equipe

USF Tampa, Team 12-1, Blackwell Fall 2015 Membro de USF Tampa, Team 12-1, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G1

Membros da 4

Autoria de 5 guias

2 comentários

Do you have a place where we can buy the speaker part?

christopher borget - Responder

Ya. Looking for speaker part myself... Where we find it at?

Tony Tone - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 3,268