Samsung Gear 360 Rear Camera Replacement

Introdução

This guide will show you how to remove the rear camera module from the Samsung Gear 360. Like the front camera, this module can be removed by completing a tear-down of the device, and unscrewing the module from there.

O que você precisa

Passo 1 Case

Samsung Gear 360 Rear Camera Replacement, Case: passo 1, imagem 1 %32

Samsung Gear 360 Rear Camera Replacement, Case: passo 1, imagem 2 %32

Samsung Gear 360 Rear Camera Replacement, Case: passo 1, imagem 3 %32

Twist silver ring on the lens counter-clockwise with force to remove it.

Editar

Passo 2

Insert a small flathead screwdriver into marked slot on camera lens and pry off camera lens cover.

Editar

Passo 3

Using a PH00 screwdriver head, remove all Phillips #00 0.75 mm screws on the front of the camera.
Repeat for the back side of the camera.

Editar

Passo 4

Samsung Gear 360 Rear Camera Replacement: passo 4, imagem 3 %32

Peel off the black rubber located on the bottom of the device using your hand or a small flathead screwdriver.

Editar

Passo 5

Once the black rubber has been removed, unscrew all Phillips #00 0.75 mm screws on the bottom of the device using a PH00 screwdriver head.

Editar

Passo 6

Using a plastic opening tool, pry the tripod mount off the device.

Editar

Passo 7

Using both hands, carefully remove the right cover off the camera body.

Editar

Passo 8

Samsung Gear 360 Rear Camera Replacement: passo 8, imagem 3 %32

To remove the left cover of the camera body, lift the left cover using a small flathead screwdriver and pull it off.

Editar

Passo 9

Once the camera body has been removed, lift and pull off the metal support ring using a small flathead screwdriver.
Repeat for both sides of the camera.

Editar