Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

  1. Using the plastic opening tool, starting at any corner on the tablet, insert the tool between the back panel and the front panel.
    • Using the plastic opening tool, starting at any corner on the tablet, insert the tool between the back panel and the front panel.

    • Slide tool around the tablet to unlock the panels from one another.

  2. Carefully remove the back panel from the front panel. The inner components of the tablet will now be exposed.
    • Carefully remove the back panel from the front panel.

    • The inner components of the tablet will now be exposed.

  3. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Comprar agora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Comprar agora
  4. Remove the two Phillips head screws attaching the auxiliary port to the plastic frame using a P000 screwdriver. Remove the four Phillips head screws attaching the motherboard to the plastic case using a P000 screwdriver. Remove the four Phillips head screws attaching the motherboard to the plastic case using a P000 screwdriver.
    • Remove the two Phillips head screws attaching the auxiliary port to the plastic frame using a P000 screwdriver.

    • Remove the four Phillips head screws attaching the motherboard to the plastic case using a P000 screwdriver.

  5. Using tweezers disconnect the headphone jack connector from the motherboard.
    • Using tweezers disconnect the headphone jack connector from the motherboard.

  6. Using tweezers, carefully lift up the motherboard. Using tweezers, remove the metal jacket holding the headphone jack in place by grabbing the left corner where there is a recess to grab it. There is a light adhesive holding the metal jacket down.  You may have to pull slightly harder to get this off.
    • Using tweezers, carefully lift up the motherboard.

    • Using tweezers, remove the metal jacket holding the headphone jack in place by grabbing the left corner where there is a recess to grab it.

    • There is a light adhesive holding the metal jacket down. You may have to pull slightly harder to get this off.

  7. Remove the auxiliary port from the case.
    • Remove the auxiliary port from the case.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Bradley Watson

Membro desde: 15/02/2017

773 Reputação

4 Guias de autoria

Equipe

USF Tampa, Team 5-4, Passmore Spring 2017 Membro de USF Tampa, Team 5-4, Passmore Spring 2017

USFT-PASSMORE-S17S5G4

3 Membros

8 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 13

Últimos 30 dias: 83

Duração total: 1,530