Skip to main content

Introdução

This guide will provide step-by-step instructions on how to replace the battery of your device. After replacing your tablet battery, it would be wise to recycle the battery at a local battery store or electronics retail center.

  1. Starting from any corner of the tablet, carefully insert the plastic pry tool into the gap between the chrome frame and black back panel. Slide the pry tool around the  tablet to release the plastic locking clips. Pry the back plastic case down and slightly away from the device while the screen is facing up. Slide the pry tool around the  tablet to release the plastic locking clips. Pry the back plastic case down and slightly away from the device while the screen is facing up.
    • Starting from any corner of the tablet, carefully insert the plastic pry tool into the gap between the chrome frame and black back panel.

    • Slide the pry tool around the tablet to release the plastic locking clips. Pry the back plastic case down and slightly away from the device while the screen is facing up.

  2. Carefully separate the rear case from the front panel assembly .
    • Carefully separate the rear case from the front panel assembly .

    • At this point, you will be able to complete any component replacements necessary.

  3. Kits de reparo de android

    A new screen or battery is one kit away.

    Comprar agora

    Kits de reparo de android

    A new screen or battery is one kit away.

    Comprar agora
  4. Use tweezers to lift the small black flap and disconnect the wire from the motherboard. Use tweezers to lift the small black flap and disconnect the wire from the motherboard.
    • Use tweezers to lift the small black flap and disconnect the wire from the motherboard.

  5. You do not need to remove the motherboard in order to remove the battery as the photos may indicate. Using a spudger, work the tool under the battery. The battery connected to the case with adhesive. Therefore, you will have to apply a bit of pressure wit the metal spudger.
    • You do not need to remove the motherboard in order to remove the battery as the photos may indicate.

    • Using a spudger, work the tool under the battery.

    • The battery connected to the case with adhesive. Therefore, you will have to apply a bit of pressure wit the metal spudger.

    • Once you have worked the tool under the battery on both sides as shown, it should lift right off of the case.

Conclusão

To reassemble your device, follow these instructions in reverse order.

26 outras pessoas concluíram este guia.

Edgard R Baladron

Membro desde: 31-08-2015

408 Reputation

Autoria de 1 guia

Team

USF Tampa, Team 1-3, Remmell Fall 2015 Membro de USF Tampa, Team 1-3, Remmell Fall 2015

USFT-REMMELL-F15S1G3

4 Membros

12 Guias de autoria

3 Comments

This is for a cell phone, not a tablet. Why?

ckmjunk - Responder

it is the tablet

sourcandysaiyan -

OH! its so easy!! woohoo, ordering battery now!

sourcandysaiyan - Responder

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 29

Past 30 Days: 131

All Time: 21,603